DJI Mic (2 TX + 1 RX + Charging Case)
How to Setup:
Upon opening the case, you have a receiver with 2 different adapters, as well as 2 microphones
Remove the middle receiver from the case, and then connect it to the plug in of your choice (iPhone or USB C). You connect the adapter to the receiver by sliding it in the bottom of the receiver.
Once connected, turn on the receiver (button on the right side)
After turning it on, connect the receiver to the charging port of your device
Now that the receiver is connected, remove one or both of the microphones
Open any recording program such as a voice memo, video, or more, and hit record
The receiver will automatically pickup any audio spoken into or near the microphone.
Purchase Here:
About This Device:
You can use DJI Mic wireless microphone with a range of devices, including cameras, smartphones (only Lightning and USB-C ports are supported), computers, Osmo Action 3, and Osmo Mobile 6.
DJI Mic transmitters and receiver are already linked by default. If you need to link them again, you can do so in the following ways:
Method 1: Put the receiver and transmitters into the charging case and they will pair automatically. This method only applies to DJI Mic (2 TX + 1 RX + Charging Case).
Method 2: Turn on the receiver and transmitters. Scroll the screen of the receiver downward to enter the control center page. Slide to the left and tap “Settings” to enter the settings page. Slide to the left again and tap “Link” to enter linking mode. Then, press and hold the link button on the side of the transmitters until the green light on the top-left corner flashes and wait for the linking to finish. When the linking indicators of the transmitters turn solid green, it means the linking is successful. This method applies to both DJI Mic (2 TX + 1 RX + Charging Case) and DJI Mic (1 TX + 1 RX).